Clinometer + bubble level 2.4

This professional tool, called Clinometer, is a highly precise slope measurement tool for devices. It utilizes all sides of the device, including the camera, to provide accurate measurements. It can be used for a wide range of applications, from simple tasks like aligning a frame to more complex scenarios where precise arbitrary slopes need to be measured.

Read and write reviews for all the different applications you come across! We greatly appreciate your positive feedback. If you have any questions or suggestions, please do not hesitate to reach out to us through our support link.

Key Features:

• Three modes, including auto-switching capability: Clinometer mode (automatically activated when held upright), Camera mode (manually activated and works in any direction), and Bubble level (smoothly fades in when held flat).
• Ability to measure both absolute and relative angles: In each mode, you can measure the relative angle between device positions in addition to measuring absolute angles.
• Advanced two-way calibration on all sides: Calibration can be performed in two steps for each of the four sides and the bubble mode. This allows for precise calibration even on non-level surfaces. Each direction can be calibrated individually to ensure optimal precision.
• Five different unit modes: The slope can be displayed in degrees (rounded or with tenth of degrees precision), percentage, rise over run (common for roof slope measurement in :12), and 1V:H (common in engineering).
• Dial rotation: The background dial can be smoothly rotated to define which side of the device represents 0° and 90° degrees.
• Motion-sensitive lock feature: In addition to the instant simple tap and hold mechanism, there is an option to activate a motion-sensitive lock. With this lock, the device waits for a steady position for at least 2 seconds before finalizing the measurement. The lock sensitivity can be adjusted between 0.1° and 1.0° degrees.
• Fullscreen mode: Toggling the center of the screen or using the upper and lower arrows in the center enables fullscreen mode. This prevents any erroneous inputs while measuring.
• Different color schemes: Pressing the S/C button allows for instant switching between color schemes. Different color sets are available for the bubble and clinometer modes, including day and night options (Black on White, White on Black, and Red).
• Adjustable auto-lock: The device can be prevented from entering sleep mode.

Please note that this application is intended for recreational use only. After calibration, it can provide highly accurate measurements, especially for the main axis. The measurement is performed using the three built-in accelerometers to deliver the best possible results.

THANK YOU FOR YOUR SUPPORT! We are committed to continuously improving the application in the long term.